370 g/Cartridge | black
370 g/Cartridge | red

Adhesive PUR 1K for selective & strip gluing from rubber moulded article
Curing one-component adhesive by humidity and sealant based on polyurethane. Visco plastic. Functioning after approx. 3 hours, final strength after approx. 24 hours. To ensure durability, note the information on the cartridges. Store in a cold and dry place (+5 °C to +25 °C).

Surfaces must be clean, dry and grease-free. Adhesion and compatibility with plastics and paints must be object-related checked. Processing like silicone – Do not open the lid, just press it.

Apply material to the substrate with spatula or putty gun. The application thickness depends on the nature of the materials to be bonded. Lay on the counter material within 10 minutes and press on. Due to the pasty consistency of the material, it is advisable to fix the composite. The curing depends on the layer thickness and the humidity.

For approx. 3 m² 1 cartridge à 370 g is needed.
Application temperature: +5 °C to +30 °C